Promise Technology Network Device EX8654 - Manual (Page 220)

SuperTrak EX Series User Manual
206
Options
-a <action> Specifies the action to perform.
list (Default) Displays the active and paused PDMs and their
status.
start Starts a manual PDM.
stop Stops a PDM.
pause Pauses a PDM.
resume Resumes a paused PDM.
-d <DA ID> Specifies which disk array on which to perform the PDM.
-s <sequence Num> Specifies the sequence number of the suspect drive.
-p <PD ID> Specifies physical drive ID of the replacement drive.
Examples
pdm
pdm -a start -d0 -s2 -p10
pdm -a stop -d0 -s2
phydrv
Usage
phydrv [-a <action>] [-p <PdId>] [-c <Pd count>] [-v]
phydrv -a mod -p <PdId> -s "<list of settings>"
phydrv -a locate -p <PdId>
phydrv -a online -p <PdId>
phydrv -a offline -p <PdId>
phydrv -a clear -t <condition type> -p <PdId>
Summary
The phydrv command displays physical drive information, changes physical drive
settings, locates individual drives, and forces a drive to an online or offline state.
Options
-a <action> Specifies the action to perform.
list (Default) Displays all physical drives, their make, model
number, and array they belong to. Their status is also
shown.
mod Modifiies physical drive settings.
locate Flashes the physical drive's LED so you can location it.