Promise Technology Network Device EX8654 - Manual (Page 303)

Appendix C: Battery Backup Unit
289
Figure 2. BBU module connectors on EX4650. Other models are similar
8. From the opposite side of the SuperTrak EX Controller card, insert and snug
the three screws to secure the Battery Assembly.
Figure 3. Three screws secure the Battery Assembly. The EX4650 is
shown. Other models are similar
9. Install the SuperTrak EX Controller card back into its PCI-Express slot.
SuperTrak EX Controller Battery Assembly
BBU module
connector
Back of SuperTrak
EX Controller
Mounting
screw 1 of 3