Promise Technology Network Device EX8654 - Manual (Page 23)

Chapter 2: Installation
9
Installing the SuperTrak Card
The SuperTrak EX Controller card fits into any available PCI-Express x8 slot. You
can also plug the SuperTrak card into a PCI-Express x16 slot.
1.
Remove the cover of your system.
2. Remove the inside slot cover of an available PCI-Express slot on the
motherboard.
3. Install the SuperTrak card into the open PCI-Express slot.
4. Fasten the SuperTrak card bracket to the system case.
5. Attach one end of a SAS multi-lane cable to a SAS port on the SuperTrak
card.
External SAS multi-lane cables are user-supplied. The external SAS ports
have SFF-8088 connectors.
See Figures 1 through 5.