Promise Technology Network Device EX8654 - Manual (Page 211)

Chapter 6: Management with the CLI
197
date
Usage
date
date -a mod [-d <date>] [-t <time>]
Summary
The date command displays the system time and date, and changes these
settings.
Options
-a <action> Specifies the action to perform.
list (Default) Displays the current system time.
mod Modifies the current system time.
Not supported for HBA products.
-d <date> Specifies the date in the following format:
yyyy/mm/dd where month's range is 1-12 and day's
range is 1-31.
-t <time> Specifies the time in the following format:
hh:mm:ss where hour range is 0-23, minute and second
range is 0-59.
Examples
date
date -a mod -d 2004/02/25 -t 14:50:05
enclosure
Usage
enclosure [-a <action>] -v
enclosure -a mod -s <list of settings>
enclosure -a locate [-t <FRU type> -f <FRU id>]
Summary
The enclosure command provides status and information about the various
components of the enclosure unit. It is also sets temperature threshold values
and displays Vendor Provided Data (VPD).
Options
-a <action> Specifies the action to perform.
list (Default) Displays information and status of the
enclosure.