Panasonic AJ-HPX2000 - Manual (Page 125)

125 Manipulating Clips with Thumbnails : Properties
Ma
ni
pu
la
ting
C
lip
s w
ith
Th
u
m
b
n
a
ils
The clip’s properties and the P2 card’s status are displayed.
It is possible to edit and rewrite recorded clip metadata while clip properties are displayed.
From the thumbnail menu, select PROPERTY > CLIP
PROPERTY. The following screen appears.
1. Clip Number
2. Thumbnail
3. Clip Information
Indicates the indicators added to the clip and the
number of text and voice memos added to the clip.
The
mark appears if the clip is recorded on a write-
protected P2 card.
‹ Note
AJ-HPX2000 is not capable of recording or playing
back voice memos.
4. Clip Information
Displays detailed information about the clip.
CLIP NAME:
Display clip names.
START TC:
The time code value at the start of the
recording.
START UB:
The user bit value at the start of the
recording.
DATE: The date of the recording.
TIME : The time at the start of the recording.
DURATION:
The time length of the clip.
V-FORMAT:
The recording format for the clip.
FRAME RATE:
The frame rate for the playback.
REC RATE:
The recording frame rate is displayed. (This
is indicated on the clip that data is recorded
in a special way using the camera recorder.)
5. Clip Meta Data
Displays more detailed data about the clip. Use the
cursor buttons to move the pointer, and press the SET
button to check the detailed content. The underlined
items are automatically set during shooting. For more
information on displayed metadata, see [Setting of Clip
Meta Data] (page 119).
1
Display the window for detailed clip metadata that you
intend to modify in the clip properties window.
2
Place the cursor on the item to be modified using the
cursor button. The metadata that can be modified are
shown like [CREATOR] in the following figure.
Properties
Clip Property
1
2
3
4
5
Modification of recorded clip metadata
AJ-HPX2000P(VQT1D27-1)E.book 125 ページ ２００７年７月３０日 月曜日 午後１時３１分