Panasonic AJ-HPX2000 - Manual (Page 25)

25 Parts and their Functions Display Window Functions
P
a
rts and
thei
r Fu
ncti
on
s
Error Code Indication (for more information, see
[Warning System] (page 145))
Display Window Functions
P2 card/battery-remaining level indications
Memory action status indication
LOOP
h
MEDIA E F
Y minM s frm
13 24
0
D
VTCG TIME DATE P-iREC
SLAVE HOLD W GPS
BATT E F
OVER OVER
10
OO
40
-dB
30
18
HDV
OP-SLOT
CTL
NDF
Battery-remaining level indication bar
For a battery with a digital indicator (percentage indication), if the
remaining level of the battery is higher than 70%, all seven
segments up to the “F” position are lit.
When the remaining level falls below 70%, the segments go out
one-by-one for each drop of 10%. All seven segments can be set
to light up when the battery-remaining balance is 100%. To do so
select “100%” for the menu option BATT REMAIN FULL in the
<BATTERY/P2CARD> screen of the MAIN OPERATION page.
Audio channel level meter
When the MONITOR SELECT CH1/2 / CH3/4 switch is set to
[CH1/2], the meter indicates 1 and 2 as the audio channel
numbers, together with their audio levels. When the switch is
set to [CH3/4], the meter indicates 3 and 4 as the audio
channel numbers, together with their audio levels.
Media-remaining space indication bar
The bar indicates the remaining free space on each P2 card,
using a seven-segment display.
Each segment can represent either three or five minutes of
remaining free space, depending on the value set through the
menu option CARD REMAIN/„. According to the set value, the
segments disappear one-by-one. The menu option CARD
REMAIN /„ can be found in the <BATTERY/P2CARD> screen
on the MAIN OPERATION page.
LOOP
h
MEDIA E F
Y minM s frm
13 24
0
D
VTCG TIME DATE P-iREC
SLAVE HOLD W GPS
BATT E F
OVER OVER
10
OO
40
-dB
30
18
HDV
OP-SLOT
CTL
NDF
Information indication
LOOP:
Stays illuminated in LOOP REC mode. For information
about the LOOP REC mode, see [Loop Recording]
(page 36).
OP-SLOT: Remains illuminated when a video encoder card is
operated in the optional slot.
Mode indication
W:
Stays illuminated when the camera-recorder operates
in SD mode (480-59.94i, 576-50i) and is set to 16:9
mode.
HD: Stays illuminated when the camera-recorder is in HD
mode (1080i, 720P).
DV: Stays illuminated when the recording/playback format
is DV.
GPS: Stays illuminated when radio waves are not received
during GPS operation.
GPS : Stays illuminated when radio waves are received
during GPS operation.
P-REC: Stays illuminated when the PRE REC MODE is set to
ON, and blinks when recording is continued after the
recording tally lamp has gone out.
iREC: Remains illuminated during INTERVAL REC mode
recording, and blinks during a pause.
i: Blinks when INTERVAL REC mode is selected.
Time code indication
NDF:
Stays illuminated when the time code is in non-drop
frame mode.
DF: Stays illuminated when the time code is in drop frame
mode.
SLAVE: Stays illuminated when the time code is externally
locked.
HOLD: Stays illuminated when the time code generator/reader
value is frozen.
CTL: Stays illuminated when the DISPLAY switch is
positioned at [CTL] to display the CTL count.
TCG: Stays illuminated when the DISPLAY switch is
positioned at [TC] (or [UB]) to display the TC (or UB)
generator value.
TC: Stays illuminated when the DISPLAY switch is positioned at
[TC] (or [UB]) to display the TC (or UB) reader value.
VTCG: Stays illuminated when the DISPLAY switch is
positioned at [UB] to display the VIUB generator value.
VTC: Stays illuminated when the DISPLAY switch is
positioned at [UB] to display the VIUB reader value.
TIME: Stays illuminated when the DISPLAY switch is positioned at
[UB] to display the real-time hour, minute and second.
DATE: Stays illuminated when the DISPLAY switch is
positioned at [UB] to display the real-time date.
No Indication:
The CTL, VTCG, TIME, and DATE stay off when the DISPLAY
switch is positioned at [UB] to display real time, time zone,
hour and minute.
Time count indication:
The time code, CTL, user bits and real time are shown.
‹ Note
When the DISPLAY switch is positioned at UB, each press of the
HOLD button changes the indication through VTCG (VTC)
> DATE
> TIME > No Indication (Time Zone) > TCG (TC), in that order.
LOOP
h
MEDIA E F
Y minM s frm
13 24
0
D
VTCG TIME DATE P-iREC
SLAVE HOLD W GPS
BATT E F
OVER OVER
10
OO
40
-dB
30
18
HDV
OP-SLOT
CTL
NDF
AJ-HPX2000P(VQT1D27-1)E.book 25 ページ ２００７年７月３０日 月曜日 午後１時３１分