Panasonic AJ-HPX2000 - Manual (Page 176)

176 Menu : Menu Description Tables
The ____ in the Adjustable Range column indicates the
preset mode.
Items/
Data Saved
Adjustable
Range
Remarks
DS.GAIN OFF L/M/H
DS.GAIN
For selecting the method used to
release the digital super gain mode
(cumulative gain).
L/M/H:
The mode is released by
making a change in the L/M/H
switch position and the
DS.GAIN switch (USER
switch).
DS.GAIN: The mode is released using
only the DS.GAIN switch
(USER switch).
– C U F –
D.ZOOM x2 ON
OFF For specifying whether to enable or
disable 2
a when a user button on the
camera-recorder is assigned the digital
zoom function.
– C U F R
D.ZOOM x3 ON
OFF For specifying whether to enable or
disable 3
a when a user button on the
camera-recorder is assigned the digital
zoom function.
– C U F R
D.ZOOM x4 ON
OFF For specifying whether to enable or
disable 4
a when a user button on the
camera-recorder is assigned the digital
zoom function.
– C U F R
RC CHECK
SW R.REVIEW
PLAY For specifying what the camera-recorder
does when the REC check button on the
remote control unit is pressed.
R.REVIEW: The camera-recorder
performs rec review.
PLAY: The camera-recorder
performs playback.
– C U F R
WHITE BALANCE MODE
Items/
Data Saved
Adjustable
Range
Remarks
FILTER INH ON
OFF For selecting independently whether
memory data for white balance (Ach,
Bch) is retained or not for the respective
CC filters.
ON: Regardless of the CC filter, data for
the memories (2 memories) for Ach
and Bch is retained.
OFF: The memory data (8 memories) for
Ach and Bch is retained for the
respective CC filters.
– C U F R
SHOCKLESS
AWB OFF
FAST
NORMAL
SLOW1
SLOW2
SLOW3 For setting the length of time for
transiting to the switched position of
white balance, when the position of the
WHITE BAL switch is changed.
OFF:
To transit instantly
FAST: About 1 second
NORMAL: About 2 seconds
SLOW1:
About 3 seconds
SLOW2: About 10 seconds
SLOW3: About 20 seconds
– C U F R
Items/
Data Saved
Adjustable
Range
Remarks
AWB AREA 25%
50%
90% For switching the detection area for
executing the automatic adjustment of
white balance.
25%: An area near the screen center
equivalent to 25% of the screen is
detected.
50%: An area near the screen center
equivalent to 50% of the screen is
detected.
90%: An area equivalent to 90% of the
screen is detected. – C U F R
AWB B MEM
ATW For selecting the function to be assigned
to the B position of the WHITE BAL
switch.
MEM: The value set when the white
balance is automatically adjusted
is saved, which is used each time
the WHITE BAL switch is set to B.
ATW: The auto-tracking white balance
function is assigned.
– C U F R
ATW SPEED NORMAL
SLOW
FAST Select the control speed for the auto-
tracking white balance.
– C U F R
COLOR TEMP
PRE 2300K ;
3200K
8000K
For setting the color temperature when
the WHITE BAL switch is set to the
PRST position.
z Since the range of color temperatures
that can be set will vary with the CC
filter position, a numerical value
cannot be changed even if the color
temperature is changed when a high
color temperature is set.
– – – F –
AWB A TEMP 2300K ;
3200K
8000K
For setting the color temperature when
the WHITE BAL switch is set to the A
position.
If the automatic adjustment of white
balance is executed in the A position,
the color temperature at that time is
memorized in the position of the WHITE
BAL switch A. If the white balance has
been automatically adjusted or the CC
filter has been switched, then up to
9000K may be indicated.
– – – F –
AWB B TEMP 2300K ;
3200K
8000K
For setting the color temperature when
the WHITE BAL switch is set to the B
position.
If the automatic adjustment of white
balance is executed in the B position,
the color temperature at that time is
memorized in the position of the WHITE
BAL switch B. If the white balance has
been automatically adjusted or the CC
filter has been switched, then up to
9000K may be indicated.
– – – F –
AJ-HPX2000P(VQT1D27-1)E.book 176 ページ ２００７年７月３０日 月曜日 午後１時３１分