Panasonic AJ-HPX2000 - Manual (Page 41)

41 Recording and Playback Shot Mark Function
R
e
c
o
rd
in
g a
n
d
P
la
y
ba
c
k
A shot mark is added to the thumbnail of a clip to
distinguish that clip from others. With the LCD monitor,
only clips that have shot marks can be viewed and/or
played back.
To add a shot mark during recording, press the SHOT
MARK button. The viewfinder displays “MARK ON” and
adds a shot mark to the thumbnail of the appropriate clip.
Another press of the button erases the shot mark.
Shot marks may also be added or erased using clip
thumbnails. For more information, see [Shot Mark] (page
115).
‹ Notes
z When the color bar is output or the unit is in LOOP REC
mode and INTERVAL REC mode, it is impossible to add/
delete shot marks.
z It is impossible to add shot marks to incomplete clips
(refer page 111).
z For clips recorded on plural P2 cards or clips split on a
P2 card (refer to
Notes on page 10), a shot mark is added
to the top clip only.
AJ-HPX2000 recording mode works according to the priorities outlined in the following table, relative to the setting of the
menus and switches.
* Disabled for color bars
Shot Mark Function
Adding Shot Marks
SHOT MARK
button
Recording Setting and Operation Mode
Functional
operation mode
Menu switches related to system/recording Buttons
Proxy
recording
(optional)
PC MODE
REC
SIGNAL
INTERVAL
REC MODE
LOOP REC
MODE
PRE REC
MODE
Recording a
Text Memo
Shot Mark
USB device
USB
DEVICE
Disabled Disabled Disabled Disabled Disabled Disabled Disabled
USB host USB HOST Disabled Disabled Disabled Disabled Enabled Enabled Disabled
1394 Input record
OFF
1394 Disabled Disabled Disabled Enabled Enabled Disabled
INTERVAL REC
CAMERA
VIDEO
SDI (optional)
ON or
ONE SHOT
Disabled Disabled Disabled Disabled Disabled
LOOP REC
OFF
ON
Enabled
1s - 8s/15s
Disabled Disabled Disabled
Normal Recording OFF
Enabled
1s - 8s/15s
Enabled* Enabled* Enabled
AJ-HPX2000P(VQT1D27-1)E.book 41 ページ ２００７年７月３０日 月曜日 午後１時３１分