Panasonic AJ-HPX2000 User Manual
Page 152
152
Menu : Menu Configuration
USER MENU:
USER MENU is factory-set. The menu can
be configured to suit your preferences by
specifying each option according to your
purposes and frequency of use, through the
<USER MENU SELECT> screen, which is
accessible from the MAIN MENU page.
For more information, see [
To display USER MENU, press the MENU
button.
MAIN MENU:
Allows you to set all options on the settings
menu.
This menu has a category-by-category
structure, layered according to purposes and
frequency of use.
To display MAIN MENU, press the MENU
button for three seconds or longer.
SYSTEM SETTING:
This option is used to specify recording
signal, recording system, etc.
PAINT:
This option is used to fine-adjust images
while monitoring the output waveform of the
camera, using the waveform monitor.
Normally, this adjustment requires
assistance from a video engineer.
This menu option may be set with an
external remote controller, and is useful
when using the unit without a sound
recordist.
VF:
Used to select the information items to be
displayed in the viewfinder screen.
CAM OPERATION:
Used to change settings according to the
conditions for the subject.
MAIN OPERATION:
Used to specify recording-related items,
such as audio settings, time code, battery
and P2 card remaining amounts.
FILE:
Used to specify file-related items such as SD
memory card reading/writing and lens file
settings.
MAINTENANCE:
Used to specify maintenance-related items.
USER MENU SELECT:
Used to edit USER MENU.
OPTION MENU:
Provides options which may be needed if
functions are added in the future.
To display OPTION MENU, hold down the
LIGHT button and press the MENU button.
For more information, contact your
distributor.
JOG dial button
MENU button
LIGHT button
Shot Mark/Cancel Menu button
AJ-HPX2000P(VQT1D27-1)E.book 152 ページ ２００７年７月３０日 月曜日 午後１時３１分