Panasonic AJ-HPX2000 User Manual
Page 78
78
Adjustments and Settings for Recording :
Viewfinder Screen Status Displays
The messages that appear on the viewfinder screen to
indicate changes to settings and adjustment results may
be limited, or set not to appear, through the menu option
DISP MODE. This menu option can be found in the <VF
DISPLAY> screen, which is accessible from the VF page.
For directions on navigating the menu, see [Setting Menu
Options] (page 153).
z: Message appears.
±: Message does not appear.
Display Modes and Setting Changes/adjustment Result Messages
# < VF DISPLAY >
DISP CONDITION :NORMAL
DISP MODE :3
VF OUT :Y
VF DTL :3
ZEBRA1 DETECT :070%
ZEBRA2 DETECT :085%
ZEBRA2 :SPOT
LOW LIGHT LVL :35%
ECU MENU DISP. :OFF
50M INDICATOR :OFF
MARKER/CHAR LVL :50%
Message appears when:
Message
DISP MODE
settings
1
2
3
CC/ND filter changed.
FILTER: n (n=1, 2, 3, 4)
±
±
z
Gain changed.
GAIN: n dB
(n=–3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30)
±
±
z
WHITE BAL switch re-positioned.
WHITE: n (n=A, B, PRE)
±
±
z
OUTPUT/AUTO KNEE switch positioned at
[AUTO KNEE] or [OFF].
AUTO KNEE: ON (or OFF)
±
z
z
Shutter speed/mode changed.
SS:
1/100 (or 1/120, 1/250, 1/500, 1/1000, 1/2000,
11/¢¢.¢)
±
z
z
White balance adjusted (AWB performed).
Example: AWB A OK 3.2 K
±
z
z
Black balance adjusted (ABB performed).
Example: ABB OK
±
z
z
Extender selected.
Example: EXTENDER ON
±
±
z
USER button selected.
Example: UM: S.GAIN 30 dB
±
z
z
MARKER SELECT button selected.
Example: MKR: A
±
±
z
Iris being overridden.
Example: ++ F 5.6
±
z
z
AJ-HPX2000P(VQT1D27-1)E.book 78 ページ ２００７年７月３０日 月曜日 午後１時３１分