Panasonic AJ-HPX2000 - Manual (Page 75)

75 Adjustments and Settings for Recording : Viewfinder Screen Status Displays
A
d
ju
stm
ents and S
e
tti
ngs f
o
r
Rec
o
rdi
n
g
17. Color temperature ¢.¢K Color temperature assigned to A, B, and PRST of the WHITE BAL switch
(this is a value stored at AWB performance or a value set through the menu
option). The indication is not provided in ATW mode.
18. Filter position 1 - 4
– Position of the CC/ND filter.
This indicates that the filter has not been set to a proper position.
19. Dynamic range
stretcher mode
DRS This appears when the video level of a part with high brightness is
compressed, and the function stretching the dynamic range is selected.
20. WHITE BAL switch
position
A
B
P
T WHITE BAL switch positioned at [A].
WHITE BAL switch positioned at [B].
WHITE BAL switch positioned at [PRST].
ATW mode active. When brightness and color are outside operating limits,
the indication blinks.
21. Stored gain
indication
6 :/10:/12:/15:/20: Storage gain (DS.GAIN) value (when active)
22. Gain value ¢¢dB Current gain value.
23. LINE MIX GAIN
display
M This appears when LINE MIX GAIN (+6 dB) is active
24. Audio input channel
and level meter
- - - - „- - - - +
F
W
R Selected channel together with its audio level.
AUDIO IN switch is positioned at FRONT.
AUDIO IN switch is positioned at W.L.(WIRELESS)
AUDIO IN switch is positioned at REAR.
25. Super black ON B Super black ON.
26. Super iris ON S Super iris ON.
27. Iris override
indication
+ +
+
(No indication)
–
– – Correction phase of the iris override (when active)
+ + : On the open side by 1
+: On the open side by 0.5
– – : On the closed side by 1 –: On the closed side by 0.5
No indication : Standard status
28. Iris, F value NC
OPEN
F1.7 - F16
CLOSE Lens cable is not connected.
Lens iris is at maximum.
Lens iris value
Lens iris closed.
‹ Note
These indications are provided when the lens is capable of indicating the iris
value. When the iris is being overridden, they blink.
29. Zoom indication Z00 - Z99 Zoom degree is indicated. This indication is not provided for a lens that does
not return the zoom position, even if the indication is set to ON.
30. INTERVAL REC/PRE
RECORDING
indication/
SD memory card
remaining free space (blink)
(blink)
¢¢h¢¢m/¢¢s
P-REC (blink)
¢¢h ¢¢m
END
Displayed before and after operation during INTERVAL REC mode.
Displayed during INTERVAL REC operation.
Displays the pause time before the next recording during INTERVAL REC.
Indicated while pre-recorded video and audio are being recorded on the P2
card. If the USER switch is set to perform the PRE RECORDING function,
either “P-REC OFF” or the specified duration “1s - 8/15s” is displayed when
the PRE RECORDING mode is switched by pressing the USER switch.
If a video encoder card (AJ-YAX800G, optional accessory) is attached, the
remaining free space on the SD Memory card will be displayed when the
MODE CHECK button is pressed during proxy recording.
[END] is displayed when there is no remaining free space.
31. Compression mode COMP This appears when setting the mode for suppressing distortion of
compressed video images that may occur when dark parts are shot. (Only
for the DVCPRO HD at 720P
)
Information Item Indication Status
[i]
[SD]
AJ-HPX2000P(VQT1D27-1)E.book 75 ページ ２００７年７月３０日 月曜日 午後１時３１分