Panasonic AJ-HPX2000 - Manual (Page 126)

126 Manipulating Clips with Thumbnails : Properties
3
Press the SET button.
The input window (soft keyboard) for modifying meta-
data is displayed. Use the keyboard to modify the meta-
data.
The keyboard operation is the same as [ Checking and
modifying read metadata ] (page 120) .
4
Press OK on the keyboard to write the modified meta-
data on the clip and return to the metadata window.
The input window (soft keyboard) for modifying meta-
data is displayed. Use the keyboard to modify the meta-
data.
‹ Note
z Deleting only the respective items of LOCATION (record-
ing location data) in SHOOT is not possible. By setting
ALTITUDE to empty, other LONGITUDE/LATITUDE items
are collectively deleted.
z The metadata for a clip with the incomplete clip indica-
tor cannot be modified. For the clips recorded on multiple
P2 cards, modify the metadata while all P2 cards are
inserted.
z Any MEMO with 100 characters or more cannot be modi-
fied.
Select PROPERTY > CARD STATUS from the thumbnail
menu to set the desired indication mode (remaining free
space or used memory capacity) for the P2 card status
display.
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Press the MENU button and select PROPERTY
PROPERTY SETUP
P2 CARD CAP from the
thumbnail menu.
The following screen appears. Select the P2 card
status display settings from the P2 CARD CAP menu
option.
REMAIN:
Show remaining free space on the P2 card as the P2
card status display. (Factory setting)
USED:
Show used memory capacity on the P2 card as the
P2 card status display.
P2 Card Status Display
P2 Card Status Display Settings
AJ-HPX2000P(VQT1D27-1)E.book 126 ページ ２００７年７月３０日 月曜日 午後１時３１分