Panasonic AJ-HPX2000 - Manual (Page 40)

40 Recording and Playback Normal and Variable Speed Playback
The PLAY/PAUSE button provides monochrome playback
through the viewfinder and color playback on the LCD
monitor. A color video monitor connected to the VIDEO
OUT or MON OUT connector of camera-recorder also
provides color playback.
The VIDEO OUT connector outputs an SDI playback (to
view the playback, the OUTPUT SEL switch on the side
panel must be positioned to [MEM]).
The FF and REW buttons provide 32 a and 4 a fast
playbacks and fast reverse playbacks.
When playback is paused, the FF button locates the
beginning of the next clip while maintaining the pause
mode.
When playback is paused, the REW button locates the
beginning of the current clip while maintaining the pause
mode.
‹ Notes
z The camera-recorder cannot play back clips where the
system mode differs. If this is the case, set the system
mode of camera-recorder to the format of the desired
clip before playing it back.
z When a P2 card has been just removed or inserted, or
when the power has been just turned on for playback, it
may take some time for camera-recorder to read clip
information. If this is the case, the viewfinder displays
“UPDATING”. If data is played back when the P2 card is
being recognized, the message “CANNOT PLAY” will be
displayed.
z If a P2 card is inserted while another P2 card is being
played back, the clips on the inserted P2 card will not be
played back. A P2 card inserted during playback will be
recognised after playback ends.
z If you perform variable speed playback on a clip split
across more than one P2 card, sound may disappear for
a moment. This is not a fault.
Text memos are time-coded thumbnails added to any
video point when a clip is being recorded or played back.
The Text Memo button adds text memo information at the
appropriate point. You can edit added text memos using
the P2 viewer.
Through a thumbnail display, you can choose and play
back the text memo point or copy any portion. For more
information, see [Text Memo] (page 115). ‹ Notes
z One clip can have up to 100 text memos.
z Text memos can also be recorded when the LCD monitor
is in thumbnail mode.
In this case, the text memo is added
to the position on the clip where the cursor is set (normally
at the beginning) only.
z Text memos cannot be recorded when the color bar is
output or the unit is in LOOP REC mode and INTERVAL
REC mode.
z For a clip with voice memos added through the AJ-
SPX800 or any other camera-recorder, you can record
up to 100 text and voice memos in combination. For
information about voice memos, see the instruction
manual for the AJ-SPX800.
Normal and Variable Speed Playback
Variable speed playback
Text Memo Function
Text MEMO button
AJ-HPX2000P(VQT1D27-1)E.book 40 ページ ２００７年７月３０日 月曜日 午後１時３１分