National Instruments DIO 6533 - Manual (Page 102)

© National Instruments Corporation B-1 DIO 6533 User Manual
Appendix
B
Optional Adapter
Description
This appendix describes an optional 68-to-50-pin DIO 6533 device
adapter. The adapter changes the pinout of the 6533 device to match the
pinout of an AT-DIO-32F device. The adapter enables you to use the
6533 device with cables, signal conditioning modules, and other
accessories that require an AT-DIO-32F pinout.
The adapter connects directly to a PCI-DIO-32HS, PXI-6533, or
AT-DIO-32HS device. Using a PSHR68-68M shielded cable, you can
also connect the adapter to a DAQCard 6533 device.
The female side of the adapter connects directly to the PCI-DIO-32HS,
PXI-6533, or AT-DIO-32HS device, or to the PSHR68-68M cable. The
male side of the adapter provides the pin assignments shown in
Figure B-1. See Chapter 4, Signal Connections , for a description of
each signal. The 50-pin adapter has no +5 V, CPULL, or DPULL pins,
and has fewer ground pins than the 68-pin 6533 device connector.