National Instruments DIO 6533 - Manual (Page 125)

DIO 6533 User Manual I-6 © National Instruments Corporation
starting, 3-12 to 3-13
pattern generation, 3-6 to 3-8
change detection, 3-7 to 3-8
message generation, 3-8
overview, 3-5 to 3-6
pattern-detection triggers, 3-6 to 3-7
specifications, A-3 to A-7
handshaking, A-6 to A-7
pattern and change detection, A-7
pattern generation, A-3 to A-5
switchless data acquisition, 2-5
T
technical support, C-1 to C-2
telephone and fax support, C-2
termination and field wiring, 4-14 to 4-16
timing connections, 4-13
timing of signals. See signal timing.
trailing-edge mode, 5-23 to 5-27
input, 5-23, 5-24
output, 5-23, 5-25
purpose and use, 3-9
timing specifications
input timing (figure), 5-26
output timing (figure), 5-27
transfer rates, 3-13 to 3-14
achieving highest possible rates, 3-13 to
3-14
maximum, 3-13
transmission line terminations (figure), 4-16
triggers
RTSI triggers, 4-8
specifications
RTSI triggers, A-7
start and stop triggers, A-7
two-way handshaking transfer. See
handshaking transfer.
U
unpacking the DIO 6533, 1-8
unstrobed I/O, 4-10 to 4-12