Figure 44. transmission line terminations, Figure 4-4, Transmission line terminations -16 – National Instruments DIO 6533 User Manual

Page 59

Advertising
background image

Chapter 4

Signal Connections

DIO 6533 User Manual

4-16

© National Instruments Corporation

Figure 4-4. Transmission Line Terminations

The following additional recommendations apply for all signal
connections to your 6533 device:

•

Separate 6533 device signal lines from high-current or high-voltage
lines. These lines are capable of inducing currents in or voltages on
the 6533 device signal lines if they run in parallel paths at a close
distance. To reduce the magnetic coupling between lines, separate
them by a reasonable distance if they run in parallel, or run the lines
at right angles to each other.

•

Do not run signal lines through conduits that also contain power
lines.

•

Protect signal lines from magnetic fields caused by electric motors,
welding equipment, breakers, or transformers by running them
through special metal conduits.

+5 V

+5 V

+5 V

6533 Device

Peripheral Device

Advertising