Modifying map lists, Modifying map lists -12 – Netopia 3300 User Manual
Page 108
4-12 Firmware User Guide
•
The Add NAT Map screen now displays the range you have assigned.
•
Select ADD NAT MAP and press Return. Your mapping is added to your map list.
Modifying map lists
You can make changes to an existing map list after you have created it. Since there may be more than one map
list you must select which one you are modifying.
From the Network Address Translation screen select Show/Change Map List and press Return.
•
Select the map list you want to modify from the pop-up menu.
Add NAT Map ("my_map")
First Private Address: 192.168.1.1
Last Private Address: 192.168.1.254
Use NAT Public Range... my_first_range
Public Range Type is: pat
Public Range Start Address is: 206.1.1.6
ADD NAT MAP CANCEL
Network Address Translation
+-NAT Map List Name--+
+--------------------+
Add Out| Easy-PAT List |
Show/Ch| my_map |
Delete | |
| |
Add Map| |
Show/Ch| |
Delete | |
| |
Add Ser| |
Show/Ch| |
Delete | |
| |
NAT Ass| |
| |
| |
| |
+--------------------+
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.