Netopia 3300 - Manual (Page 78)

3-34 Firmware User Guide
• Allow only specified addresses - limits access to only those addresses that you enter.
• Deny only specified addresses - prevents access from only those addresses that you enter.
If you want to apply MAC Authentication to addresses on the wired LAN as well as the wireless LAN, toggle
Wireless Only to No.
Note: The Wireless Only option appears only on models equipped with a wireless inter face.
Select Add MAC Address and press Return. The Add MAC Address screen appears.
Enter the MAC (hardware) address of the client PC you want to authorize for access to your wireless LAN. MAC
Allowed is set to Yes (enabled) by default. Toggling this to No (disabled) specifically denies access from this
MAC address.
Select ADD MAC NOW, and press Return.
Your entr y will be added to a list of up to 32 authorized addresses. To display the list of authorized MAC
addresses, select Display/Change MAC Addresses from the Authorized MAC Addresses menu.
Add MAC Address
MAC Allowed: Yes
MAC Address: 00-0a-27-ae-71-a4
ADD MAC NOW CANCEL
Return/Enter accepts * Tab toggles * ESC cancels.
Configure a new MAC in this Screen.