Netopia 3300 - Manual (Page 86)

3-42 Firmware User Guide
Logging
You can configure a UNIX-compatible (BSD syslog protocol - RFC 3164) syslog client to repor t a number of
subsets of the events entered in the Router’s WAN Event Histor y. See
“WAN Event Histor y” on page 9-4 .
Select Logging from the System Configuration menu.
The Logging Configuration screen appears.
By default, all events are logged in the event histor y.
• By toggling each event descriptor to either Yes or No, you can determine which ones are logged and which
are ignored.
• You can enable or disable the syslog client dynamically. When enabled, it will repor t any appropriate and
previously unrepor ted events.
• You can specify the syslog ser ver’s address either in dotted decimal format or as a DNS name up to 63
characters.
• You can specify the UNIX syslog Facility to use by selecting the Facility pop-up.
• The following three fields allow you to log exceptions based on your filter policies:
• Filter Violations,
• Accepted Packets, and
• Access Attempts
See “About Filters and Filter Sets” on page 10-21 for more information.
Logging Configuration
WAN Event Log Options
Log Boot and Errors: Yes
Log Line Specific: Yes
Log Connections: Yes
Log PPP, DHCP: Yes
Log IP: Yes
Syslog Parameters
Syslog Enabled: No
Hostname or IP Address:
Facility... Local 0
Log Filter Violations: No
Log Accepted Packets: No
Log Access Attempts: No
Return/Enter accepts * Tab toggles * ESC cancels.