Netopia 3300 User Manual
Page 39
WAN Configuration 2-23
The Diffser v options are displayed.
•
Enter a value from 60 to 100 (percent) in the Lo/Hi Ratio field.
Differentiated Ser vices uses the low-to-high priority queue ratio to regulate traffic flow. For example, to
provide the least possible latency and highest possible throughput for high priority traffic, you could set the
ratio to 100(%). This would cause the Router to for ward low priority data only after the high priority queue is
completely empty. In practice, you should set it to something less than 100%, since the low priority traffic
might have to wait too long to be passed, and consequently be subject to time-outs.
You can then define custom Rules. If your applications do not provide Quality of Ser vice (QoS) control, rules
allow you to define streams for some protocols, por t ranges, and between specific end point addresses.
•
To define a Rule, select Add Rules and press Return.
(Once you have added one or more rules, you can edit any of them by returning to this screen and selecting
Show/Change Rules.)
Diffserv Options
Diffserv Enabled: Yes
Lo/Hi Ratio: 0
Show/Change Rules...
Add Rules...
Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.