Netopia 3300 User Manual
Page 231
IP Setup 7-39
The Add Additional LAN screen appears.
Supply the following information:
•
Name – Enter a descriptive name for the ALAN or accept the assigned default.
•
Enabled – Toggles whether the ALAN is active or not. The default is Yes.
•
MAC Address – This field contains the MAC address of the inter face. This is assigned automatically by the
system, and cannot be modified.
•
Ethernet IP Address – The IP address of the additional LAN.
•
Ethernet Subnet Mask – The IP subnet mask address of the additional LAN.
•
Define Additional Subnets – Additional subnets for multi-homing (same as the primar y inter face). See
.
•
IP Address Serving – Same as the global link to address ser ving. See
“IP Address Ser ving” on page 7-17
.
•
RIP Options – Same as the primar y inter face. See
.
•
VRRP Options – Same as the primar y inter face. Two Vir tual routers can be added to each of the ALANs.
See
“Vir tual Router Redundancy (VRRP)” on page 7-34
•
Multicast Forwarding – Same as the primar y inter face. See
“Multicast For warding” on page 7-33
•
Filter Set – Attaches a defined filter set to the LAN. See
“About Filters and Filter Sets” on page 10-21
.
When you are finished, select COMMIT and press Return. Your ALAN is configured.
Note:
ALAN creation or deletion takes effect only upon reboot. See
“Restar ting the System” on page 11-8
you don’t know how to do this.
Add Additional LAN
Name: Additional LAN 1
Enabled: Yes
MAC Address: 00:00:00:00:00:00
Ethernet IP Address: 0.0.0.0
Ethernet Subnet Mask: 0.0.0.0
Define Additional Subnets...
IP Address Serving...
Rip Options...
Proxy Arp Enabled: No
Multicast Forwarding... None
VRRP Options...
Filter Set...
Remove Filter Set
COMMIT CANCEL
Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.