Ip setup, Filter sets, Ip address serving – Netopia 3300 User Manual
Page 46: Network address translation (nat), Ip setup -2, Filter sets -2, Ip address ser ving -2, Network address translation (nat) -2
3-2 Firmware User Guide
The System Configuration menu screen appears:
IP Setup
These screens allow you to configure your network’s use of the IP networking protocol.
•
Details are given in
.
Filter Sets
These screens allow you to configure security on your network by means of filter sets and a basic firewall.
•
Details are given in
IP Address Serving
These screens allow you to configure IP address ser ving on your network by means of DHCP, WANIP, and BootP.
•
Details are given in
“IP Address Ser ving” on page 7-17
.
Network Address Translation (NAT)
These screens allow you to configure the Multiple Network Address Translation (MultiNAT) features.
•
Details are given in
“Multiple Network Address Translation” on page 4-1
System Configuration
IP Setup...
Filter Sets...
IP Address Serving...
Network Address Translation (NAT)...
Stateful Inspection...
VLAN Configuration...
Date and Time...
Wireless Configuration...
Console Configuration
SNMP (Simple Network Management Protocol)...
Security...
Upgrade Feature Set...
Router/Bridge Set... Router
IGMP (Internet Group Management Protocol)...
Logging...
Use this screen if you want options beyond Easy Setup.