Netopia 3300 - Manual (Page 268)

10-4 Firmware User Guide
Limited user configuration
The Add Access Name/Password and Show/Change Access Name/Passwords screens allow you to select
which configuration features a limited (non-Superuser) user can access. From the Security Options screen,
select Add Access Name/Password. The Add Access Name/Password screen appears.
• Assign a User Name and Password, and enable or disable Telnet and Web access as in the Superuser
Configuration screen.
• Select Access Privileges, and from the pop-up menu, choose which access privilege you want this user to
have: All, LAN, or WAN.
If you assign any of these privileges, limited users will have full access to privileges associated with these
inter faces. You can customize these privileges fur ther, in order to limit access to only cer tain por tions of
those inter faces’ configuration, by selecting Custom. If you select Custom, the Access Privileges
(Custom) screen appears.
Add Access Name/Password
Name (19 characters max): user
Password: ********************
Telnet Access Enabled: Yes
+-----------+
+-----------+
Access Privileges... | All |
| LAN |
| WAN |
| Custom... |
+-----------+
ADD USER CANCEL