Netopia 3300 User Manual
Page 227
IP Setup 7-35
Select Add Virtual Router and press Return.
The Add Vir tual Router screen appears.
•
VRID – Enter a VRID value. Each logical IP inter face can have a maximum of two Vir tual Routers. A Vir tual
Router is identified by its Vir tual Router Identifier (VRID). The VRID must be unique within the IP inter face.
•
Virtual IP Address – Enter a Virtual IP Address. Each Vir tual Router can have one associated Vir tual IP
Address. The Vir tual IP Address (VIP):
•
must be in the range of IP addresses covered by the IP inter face or the subnets
•
must not match the IP address of any other VIP
Ethernet LAN VRRP Options
Display/Change Virtual Routers...
Add Virtual Router...
Delete Virtual Router...
Monitor WAN: Yes
Serve/Relay DHCP only if
Virtual Router in Master state: No
DHCP Gateway IP Address: 0.0.0.0
Add Virtual Router
VRID: 0
Virtual IP Address: 0.0.0.0
Priority: 100
Preempt Mode: Yes
Advertisement-Interval: 1
Enable: No
ADD VIRTUAL ROUTER NOW CANCEL
Enter a value between 1 and 255.