Netopia 3300 - Manual (Page 262)

9-12 Firmware User Guide
Setting the IP trap receivers
1. Select Add IP Trap Receiver.
2. Select Receiver IP Address or Domain Name. Enter the IP address or domain name of the SNMP manager
you want to receive the trap.
3. Select Community String if you enabled one in the SNMP Setup screen, and enter the appropriate
password.
IP Trap Receivers
Display/Change IP Trap Receiver...
Add IP Trap Receiver...
Delete IP Trap Receiver...
Return/Enter to modify an existing Trap Receiver.
Navigate from here to view, add, modify and delete IP Trap Receivers.
Add IP Trap Receiver
Receiver IP Address or Domain Name:
Community String:
Send Heartbeat Trap: Yes
ADD TRAP RECEIVER NOW CANCEL