Netopia 3300 - Manual (Page 62)

3-18 Firmware User Guide
• TOS-Priority – Use any 802.1p priority bits in the VLAN header to prioritize packets within the Gateway’s
internal queues, according to DiffSer v priority mapping rules. See
“Diffser v Options” on page 2-22 for
more information.
• IPTOS-Promote – Write any 802.1p priority bits into the IP-TOS header bit field for received IP packets on
this por t destined for this VLAN. Write any IP-TOS priority bits into the 802.1p priority bit field for tagged IP
packets transmitted from this por t for this VLAN. All mappings between Ethernet 802.1p and IP-TOS are
made according to a pre-defined QoS mapping policy. See
“Diffser v Options” on page 2-22 for more
information.
Select COMMIT and press Return. Your VLAN settings will be associated with the por t you have selected.
Note: VLAN changes require a reboot to take effect. See “Restar ting the System” on page 11-8 .
Changing or Deleting a VLAN
You can change or delete a VLAN by returning to the VLAN Configuration screen and selecting Display/Change
VLAN or Delete VLAN. In either case, select the VLAN that you want to change or delete from the pop-up menu,
and press Return.
Changing or Deleting an Authentication Server Configuration
You can change or delete a RADIUS or TACACS ser ver profile by returning to the VLAN Configuration screen and
selecting Authentication Server Configuration, then Display/Change Server Profile or Delete Server Profile. In
either case, select the Ser ver Profile that you want to change or delete from the pop-up menu, and press
Return.
VLAN Configuration
VLAN Enable: +----------VLAN ID: NAME----------+
+---------------------------------+
Display/Change VLAN... | 10: Network A |
Add VLAN... | |
Delete VLAN... | |
| |
Authentication Server| |
| |
| |
| |
+---------------------------------+
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.