Netopia 3300 - Manual (Page 58)

3-14 Firmware User Guide
Caution!If you enable 802.1x for a VLAN that includes a wireless SSID, you must access the Wireless LAN
Configuration menu and set Enable Privacy to WPA-802.1x as well. See “Enable Privacy” on page 3-26 . If
multiple SSIDs are split across several VLANs, the VLANs must either:
• all have 802.1x enabled with WPA-802.1x enabled in Wireless Privacy, or
• have the VLANs set to 802.1x disabled and Wireless Privacy set to some other privacy setting. In that case
Wireless Privacy can be any setting. Wireless does not currently suppor t separate privacy modes per SSID.
When enabling WPA-802.1x, wireless will default to the RADIUS configuration specified in Advanced Security
Options (see “Advanced Security Options” on page 10-6 ), unless it is par t of a VLAN. If it is par t of a VLAN it will
use the VLAN authentication profile's specified RADIUS ser ver.
Select Add RADIUS Profile and press Return.
Add VLAN...
VLAN ID (1-4094): 10
VLAN Type... global
VLAN Name: Network A
VLAN Network: Primary LAN
+----------Profile Name-----------+
802.1x: +---------------------------------+
Authentication Profile... | <Add RADIUS Profile> |
| |
Once a VLAN has been successfully| |
"Add Port Interface" option of th| |
+---------------------------------+
ADD VLAN CANCEL