Netopia 3300 - Manual (Page 14)

1-4 Firmware User Guide
Connecting through a Telnet Session
Features of Netopia Firmware Version 8.7 can be configured through the Telnet screens.
Before you can access the console screens through Telnet, you must have:
• A network connection locally to the Router or IP access to the Router.
• Telnet software installed on the computer you will use to configure the Router
Configuring Telnet software
If you are configuring your device using a Telnet session, your computer must be running a Telnet software
program.
• If you connect a PC with Microsoft Windows, you can use a Windows Telnet application or run Telnet from
the Star t menu.
• If you connect a Macintosh computer running Classic Mac OS, you can use the NCSA Telnet program
supplied on the Netopia CD. You install NCSA Telnet by dragging the application from the CD to your hard
disk.
Mac OS X users can use the Terminal application that comes with Mac OS X in the Utilities folder.