Factory default to a saved configuration, Factory default to a saved configuration – Netopia 3300 User Manual
Page 312
10-48 Firmware User Guide
A warning screen will ask you to confirm your choice.
Factory Default to a saved configuration
If you need to Factor y Default the Router, it may be useful to be able to return to a previously saved
configuration, rather than to completely reconfigure all your settings. To do this, you designate one of your
saved configurations as the Factor y Default configuration.
From the
Factory Default from Configuration
pop-up menu, select the configuration you want to designate as
the Factor y Default.
Configuration Management
+-Configuration Name---Type---+
Save Current Configuration as... +-----------------------------+
Replace Existing Configuration... | HappyInternet Binary |
Boot from a Configuration... | Config1 Binary |
Delete a Configuration... | LesMizz Binary |
+-----------------------------+
Factory Default from Configuration: <none>
Remove Factory Default Configuration
Configuration Management
+-----------------------------------+
Save Current Conf+-----------------------------------+
Replace Existing | LesMizz Binary |
Boot from a Confi| HappyInternet Binary |
Delete a Configur| Config1 Binary |
| |
| |
| |
| |
Factory Default f| |
Remove Factory De+-----------------------------------+
Up/Down Arrows to select, then Return/Enter; ESC to cancel.