Netopia 3300 - Manual (Page 11)

Introduction 1-1
Chapter 1
Introduction
This Firmware User Guide covers the advanced features of the Netopia ENT Enterprise-Series Router family.
Your Netopia equipment offers advanced configuration features accessed through the Main Menu of the Telnet
configuration screen. This
Firmware User Guide documents the advanced features, including advanced testing,
security, monitoring, and configuration. This Firmware User Guide should be used as a companion to the
Quickstar t Guide and the Getting Star ted Guide . You should read the Quickstar t Guide and the Getting Star ted
Guide before reading this Firmware User Guide .
What’s New in 8.7
New in Netopia Firmware Version 8.7 are the following features:
• DoS Detect option in Stateful Inspection. See “Stateful Inspection” on page 3-3 .
• Default Stateful Inspection installation list of open por ts. See “Open por ts in default Stateful Inspection
installation” on page 3-10.
• Additional Syslog messages. See “Log event dispositions” on page 3-43 .
• “Procedure for Default Installation for ICSA firewall cer tification of Small/Medium Business Category
Module (ADSL Routers)” on page 3-48
.
• IGMP V3 suppor t. See “IGMP (Internet Group Management Protocol)” on page 3-39 .
• Wireless Multi-media (WMM) suppor t. See “Wireless Multimedia (WMM)” on page 3-25 .
• IKE Dead Peer Detection timeout now defaults to 20 seconds. See “Advanced IKE Phase 1 Options” on
page 6-7 .
• Suppor t of VLAN ID 0. See “VLAN Configuration” on page 3-11 .
Corresponding commands have been added to the Command Line Inter face (CLI). In addition:
• New show wireless clients and show wireless statistics commands.
• Broadcast WAN routes via RIP "Yes/No" is now a configurable option. See rip exclude-wan-routes CLI
option to all WAN inter faces.
• CLI now suppor ts initiating a telnet session from the command line.
See the Command Line Inter face Commands Reference available on the Netopia website.