Netopia 3300 - Manual (Page 178)

6-12 Firmware User Guide
Note: The Change Connection Profile screen will offer different options, depending on the model of gateway
you are using. You can associate an IPsec profile with the Primar y, the Backup, or choose to apply it to Any Por t
of the WAN inter face by choosing the inter face from the Interface Group pop-up menu as shown below.
Example #2: Add Connection Profile menu, showing Interface Group pop-up:
From the Encapsulation Type pop-up menu, select IPsec. Then select Encapsulation Options and press Return.
The IPsec Tunnel Options screen appears.
Add Connection Profile
Profile Name: Profile 1
Profile Enabled: Yes
Encapsulation Type... IPsec
Encapsulation Options...
IP Profile Parameters...
+--------------+
+--------------+
Interface Group... | Primary |
| Backup |
| Any Port |
+--------------+
COMMIT CANCEL