Ip parameters (wan default profile), Ip parameters (wan default profile) -24, Een (see – Netopia 3300 User Manual

Page 120: Of the default pr, Ip parameters (wan default profile)

Advertising
background image

4-24 Firmware User Guide

IP Parameters (WAN Default Profile)

The Netopia Firmware Version 8.7 using RFC 1483 suppor ts a WAN default profile that permits several
parameters to be configured without an explicitly configured Connection Profile.

The procedure is similar to the procedure to bind map lists and ser ver lists to a Connection Profile.

From the Main Menu go to the WAN Configuration screen, then the Default Profile screen. Select IP Parameters
and press Return.

The IP Parameters (Default Profile) screen appears.

Toggle Address Translation Enabled to Yes.

Select NAT Map List and press Return. A pop-up menu displays a list of your defined map lists.

Main

Menu

WAN

Configuration

IP Parameters

WAN Default

Profile

IP Parameters (Default Profile)

Address Translation Enabled: Yes

NAT Map List... Easy-PAT List
NAT Server List... Easy-Servers

Filter Set (Firewall)...
Remove Filter Set

Rip Options...

Return/Enter accepts * Tab toggles * ESC cancels.

Advertising