Nortel Networks BCM200/400 - Manual (Page 143)

Chapter 8 Installing a media bay module (MBM) 143
BCM200/400 4.0 Installation and Maintenance Guide
To install an MBM in the BCM main unit or expansion unit
1 Ensure that the switches on the MBM are set correctly. For information about how to set the
switches, refer to
“Determining MBM DIP switch settings” on page 118 . In the case of FEM
modules, the switches activate the front ports. Ensure that the switches accurately reflect the
ports you require. Refer to
“FEM switch settings” on page 140 .
2 Select an open media bay.
3 With the face of the MBM facing toward you, insert the MBM into the open bay.
4 Push the MBM completely into the unit. You will hear a click when the MBM is firmly seated
in the media bay.
5 Repeat steps 2 to 4 for each MBM you want to install.