Installing the main unit on a flat surface, Refer to, Figure 58 – Nortel Networks BCM200/400 User Manual
Page 96: Figure 59
100
Chapter 6 Installing the BCM main unit
N0060612
N0060612
Figure 58 Attach the wall-mount brackets to the BCM200 main unit
Figure 59 Attach the wall-mount brackets to the BCM400 main unit
8
Hang the BCM main unit on the backboard screws. Make sure the main unit is level. Ensure
the wood screw heads seat fully into the wall-mount bracket slots.
9
Tighten the wood screws against the wall-mount bracket.
Installing the main unit on a flat surface
Use this procedure to install the BCM main unit on any flat surface that can safely support the
weight of the unit.
Caution: Refer to
“Environmental requirements” on page 89
for acceptable
environmental conditions before selecting a location for the BCM main unit.
Install wall-mount
bracket screws
Install wall-mount
bracket screws