Nortel Networks BCM200/400 - Manual (Page 92)

96 Chapter 6 Installing the BCM main unit
N0060612 N0060612
Figure 53 Attach the rack-mount bracket to the BCM400 main unit
Figure 54 Attach the mounting bracket to the expansion unit
To mount the main unit in an equipment rack
1 Determine the location in the rack where you want to install the main unit.
2 Position the main unit in the rack. Have an assistant hold the main unit.
3 Align the holes in the rack-mount bracket with the holes in the equipment rack rails.
4 Fasten the rack-mount brackets to the rack using the four supplied screws (see Figure 55 ,
Figure 56 , or Figure 57 ).
Install rack-mount
bracket screws