Nortel Networks BCM200/400 - Manual (Page 193)

Chapter 14 Configuring the BCM system 193
BCM200/400 4.0 Installation and Maintenance Guide
Startup parameters overview
The startup parameters are the remaining required parameters that cannot be configured using
Telset Administration. These parameters must be configured using Element Manager or the
Startup Profile. See
Table 68 for a list of the startup parameters.
Table 68 Startup parameters (Sheet 1 of 2)
Parameters Telset Administration Element Manager Startup Profile
System:
• System name
N/A Configuration > System >
Identification
(ID set automatically)
System
System:
• System ID
N/A Configuration > System >
Keycodes
(View ID - it is set
automatically and cannot
be changed)
System
Time:
• Date and Time source
• NTP server address
• Date and time
• Time zone
N/A Configuration > System >
Date and Time Time
DHCP server:
• Enable/disable server
• IP domain name
• Primary DNS
• Secondary DNS
• Default gateway
N/A Configuration > Data
Services > DHCP Server >
Subnets tab DHCP Server
IP Phones:
• Enable registration
• Enable global pwd
• Global pwd
• Auto-assign DNs
• Advertisement logo
N/A Configuration > Resources
> Telephony Resources IP Telephones
SNMP Agent:
• Enable/disable SNMP
agent
• Minimum security
• SNMP version support
N/A Configuration >
Administrator Access >
SNMP > General tab SNMP Agent
SNMP community:
• Community string
• Type of access
N/A Configuration >
Administrator Access >
SNMP > Community
strings tab SNMP Community