Nortel Networks BCM200/400 - Manual (Page 163)

Chapter 9 Connecting the cables 163
BCM200/400 4.0 Installation and Maintenance Guide
DECT combinations
This section describes a system containing a DECT MBM, three BRIM MBMs, and two DSM 32s.
This configuration uses all the DS30 channels, with the exception of one offset.
Table 58 demonstrates this combination, including the switch settings for each MBM.
Table 58 Three BRI modules, two DSM 32s, and one DECT module
DS30
channel #
Each heavily-outlined and shaded square
represents one module Switch setting
1
DECT
offset 0
3
BRI
offset 0, 1 and 2
2
DSM32s
offset 0 1 2 3 4 5 6
2 0 on on on on on on
3
4 0 on on on on off on
5
6 0 DECT switch settings: on on off on on on
7 0 BRI settings on on on off on off
1 BRI settings on on off off on off
2 BRI settings on off on off on off