Nortel Networks BCM200/400 - Manual (Page 195)

Chapter 15 Using Telset Administration to set the basic parameters 195
BCM200/400 4.0 Installation and Maintenance Guide
Chapter 15
Using Telset Administration to set the basic
parameters
Telset Administration allows you to use a digital telephone with a two-line display to set the BCM
configuration parameters. You cannot set all the basic parameters using Telset Administration.
Therefore, after configuring the initial parameters, you must use Element Manager to set the
startup parameters. Refer to
“Configuring the startup parameters” on page 206 .
Refer to the BCM 4.0 Telset Administration Guide for more information on Telset Administration.
Figure 95 shows an overview of using Telset Administration to set the basic parameters.
Figure 95 Overview of using Telset Administration