Raid upgrade kit – Nortel Networks BCM200/400 User Manual
Page 70

70
Chapter 2 Introducing the BCM hardware
N0060612
N0060612
Figure 42 BCM200 main unit hard disk and bracket
Figure 43 BCM400 main unit hard disk and bracket
RAID upgrade kit
The BCM200 main unit and the BCM400 main unit (standard) can contain a redundant array of
independent disks (RAID). The RAID upgrade kits have a single hard disk (mirror) and RAID
controller card. Use your current hard disk (from the single disk system) as the primary hard disk.
When the RAID upgrade is installed, the data from the primary hard disk is written to the mirror
hard disk. The dual hard disk configuration provides one-fault tolerance capability.
Hard disk bracket
Front view
Hard disk
Rear view
Hard disk bracket lift tab
Connector
Hard disk bracket
Front view
Hard disk
Rear view
Hard disk bracket lift tab