Configuring the bcm system, Chapter 14 configuring the bcm system, Refer to – Nortel Networks BCM200/400 User Manual
Page 191: Chapter 14
Advertising
Chapter 14 Configuring the BCM system
191
BCM200/400 4.0 Installation and Maintenance Guide
Chapter 14
Configuring the BCM system
This section provides information on configuring the basic BCM parameters. You can configure
more advanced parameters using Element Manager or Telset Administration after the BCM
system is operational.
shows an overview of configuring the basic BCM parameters.
Figure 94 Overview of configuring the basic BCM parameters
For simplicity, the task of configuring the basic BCM parameters is divided into two parts:
•
“Initial parameters overview” on page 192
•
Advertising