Renesas SH7781 - Manual (Page 615)

13. PCI Controller (PCIC)
Rev.1.00 Jan. 10, 2008 Page 585 of 1658
REJ09B0261-0100
Bit Bit Name
Initial
Value R/W
Description
8 to 6
⎯
All 0 SH: R
PCI: R
Reserved
These bits are always read as 0. The write value
should always be 0.
5 DSI 0 SH: R
PCI: R
DSI
The write value should always be 0.
0: Indicates that the proper initialization is not required
4
⎯ 0
SH: R
PCI: R
Reserved
These bits are always read as 0. The write value
should always be 0.
3 PMEC 1 SH: R/W
PCI: R
PCI PME Clock
Specifies whether the clock is required to support
PME.
0: The clock is not required to support
PME.
Note: The PCIC in this LSI dose not have the
PME
pin.
2 to 0 PMV 010 SH: R/W
PCI: R
Version
Indicates the version of the power management
specifications.
010: Indicates that the power management
specification conforms to revision 1.1