Ricoh AP306 - Manual (Page 101)

Menu Table
89
5
*1 This menu appears when you use the duplex printer.
*2 The setting is not effective.
*3 Available only when the optional parallel interface board is installed in the printer.
*4 This menu appears when { Enter }, { Escape } and { Menu } are pressed while the printer
is online.
*5 If “Log Protect” is set to “On”, this menu will not appear.
*6 Available only when the optional Network Interface Board is installed in the printer.
System Menu 13. PrinterLang.
14. Language
32. IP Address *6
33. Subnet Mask *6
34. Gateway Add *6
35. Access CTL. *6
36. Access Mask *6
37. Net Boot *6
38. Frame NW *6
39. Active PTL. *6
Maintenance 1. Reinstall
⇒
P.80 “Replacing the Charger”
2. Toner Select
⇒
P.73 “Replacing a specific toner cartridge”
3. Toner Level
⇒
P.67 “Adjusting the Image Density”
4. Registration
⇒
P.69 “Adjusting the Setting of Registration of
the Paper Tray”
5. Toner Empty
⇒
P.68 “Setting the Toner Empty Menu”
6. Menu Reset
⇒
P.104 “Resetting Menus”
7. Menu Protect *4 ⇒
P.85 “Protecting the Menus”
8. Log Protect *4 ⇒
P.108 “Protecting the User Code Record”
9. Log Clear *5 ⇒
P.109 “Deleting the User Code Record”
10.Ethernet *4 *6 ⇒
P.49 “Printer Does Not Print”
List Print 1. Config.Page
⇒
P.99 “Printing the Configuration Page”
2. Color Sample
⇒
P.103 “Printing the Color Sample”
3. Job Log
4. Statistics
Select PDL