Ricoh AP306 - Manual (Page 74)

Troubleshooting
62
4
B
Open paper exit cover 2 inside of
paper exit cover 1.
Note
❒ When opening paper exit cover
2, be careful not to touch the fus-
ing section because it could be
very hot.
C
Push the front cover release but-
ton and open the front cover.
D
Turn the dial downward, then re-
move the misfed paper.
Note
❒ When removing misfed paper,
be careful not to touch the fus-
ing section because it could be
very hot.
When you can see the misfed
paper inside the printer
Note
❒ If it is difficult to turn the dial,
turn it slightly upward and then
try again.
A Remove the misfed paper from
inside of the printer.
While turning the dial, remove
the misfed paper as shown in
the illustration. Be careful not to
leave any misfed paper in the
printer.
Note
❒ When removing misfed pa-
per, be careful not to touch
the fusing section because it
could be very hot.
When you cannot see the misfed
paper inside the printer
A Remove the misfed paper from
the output tray.
While turning the dial, remove
the misfed paper as shown in
the illustration. Be careful not to
leave any misfed paper in the
printer.
ZBGY060E
ZBGY011E ZBGY070E