Ricoh AP306 User Manual
Page 46
Paper and Other Media
34
3
C
Select the paper size you have
loaded in the tray.
Standard paper size
A Press {T} or {U} to display the
paper size that is in the tray.
B Press {
Enter
}.
<Bypass Size> j
A5 l
The following message appears
on the panel display.
<Media> j
2.Bypass Size l
Custom size paper
A Press {T} or {U} to display
“Custom”.
B Press {
Enter
}.
<Bypass Size> j
Custom l
The following message appears
on the panel display.
<Custom> l
jl/# Width 210mm
C Press {T} or {U} to change the
third (leftmost) digit of the pa-
per width, and then press {
En-
ter
}.
The pointer (l) moves to the
right.
<Custom> l
jl/# Width 110mm
Note
❒ Press {
Escape
} to move the
pointer to the left.
❒ Press {
Escape
} while the
pointer is located at the left-
most digit of the width to
cancel the settings and return
to step
D.
D Repeat step C to set the value of
the width.
While the pointer is located at
the first (rightmost) digit of the
width, press {
Enter
} to advance
to the length setup display.
Note
❒ Press {
Escape
} while the
pointer is located at the left-
most digit of the width to re-
t u r n t o t h e w i d t h s e t u p
display.
E Repeat steps C and D to set the
value of the length.
While the pointer is located at
the first (rightmost) digit of the
length, press {
Enter
} to return to
“Media”.
<Media> j
2.Bypass Size l
F Press {
Escape
}.
The "Ready" message appears
on the panel display.
IPDL-C
Ready