Ricoh AP306 - Manual (Page 106)

Using the Operation Panel
94
5
❖ E.Print Errors
You can select if an error report should be printed from the current tray when
a PostScript error occurs while printing.
• Off
No error report is printed when an error occurs.
• On
An error report is printed when an error occurs. It uses some of the VM
area to turn this feature on.
❖ F.KTalk Mode
This setting is not available.
❖ G.Parallel IF1
You can select the parallel interface timing. When “SystemDefault” is select-
ed, the setting in the “System Menu” is used.
• SystemDefault
• ACK Inside
• ACK Outside
❖ H.Parallel IF2
You can select the parallel interface timing. When “SystemDefault” is select-
ed, the setting in the “System Menu” is used.
• SystemDefault
• ACK Inside
• ACK Outside
Important
❒ Do not use the “ACK Outside” setting.
System Menu
The following are the settings you can make with the “System Menu”.
Note
❒ Italicized settings indicate default settings.
❖ 1. Paper Tray
You can select the default paper tray that is selected whenever you turn on
the printer.
• Tray1
• Tray2 (option)
• Tray3 (option)
• Bypass