Ricoh AP306 User Manual
Page 96
Using the Operation Panel
84
5
B
Press {T} or {U} to display the screen for the setting you want to change,
and then press {
Enter
}.
<Menu> j
System Menu l
The following message appears on the panel display.
<System Menu> j
1.Paper Tray l
C
Press {T} or {U} to display the screen for the menu item you want to
change, and then press {
Enter
}.
<System Menu> j
2.Tray Size[*]l
An asterisk (“*”) is indicated at the left side of the currently selected item.
<Tray Size[*]> j
*8.5x13 l
D
Press {T} or {U} to display the screen for the setting you want to change,
and then press {
Enter
}.
<Tray Size[*]> j
8.25x13 l
This registers the setting.
E
Repeat steps
C and D to change other settings.
F
Press {
On Line
}.
The following message appears on the panel display.
Take Offline
Then Press Reset
G
Press {
On Line
}.
The On Line indicator stays off and the printer enters offline.
H
Press {
Reset
}.
This restarts the printer with the new settings.
Note
❒ You can check the current menu settings by printing a configuration page.