Ricoh AP306 - Manual (Page 114)

Using the Operation Panel
102
5
Interpreting Configuration Page/RICOH-SCRIPT2
❖ Reference
Shows the printer system version and so on. You can also see the status of the
paper tray.
❖ Tray Status
Shows the status of the paper trays.
If you install the paper feed unit, it is described as “Tray2” and/or “Tray3”.
If "FRE" is indicated for bypass tray, it means "Custom Size" is set for bypass
tray.
❖ RPS2 Status
Shows the current settings for the RPS2 mode.
❖ Memory Status
Shows the amount of printer memory, VM area and so on.
Reference
For more information about printer memory and VM area, see the “Oper-
ating Instructions” for RICOH-SCRIPT2 included as a PDF file on the CD-
ROM.
❖ Font Status
This is not used for this printer.
❖ Installed Fonts
Shows the fonts installed on the printer.
❖ Interface Status
Shows that the Network Interface Board is installed.
❖ Network & TCP/IP Status
Shows the network and TCP/IP items and their settings.
❖ Netware Status
Shows the NetWare items and their settings.
❖ NetBEUI Status
Shows the NetBEUI items and their settings.
❖ AppleTalk Status
Shows the AppleTalk items and their settings.