Deleting the user code record, P.109 “deleting the user code record – Ricoh AP306 User Manual
Page 121
Administering Printing by User Code
109
5
C
Press {T} or {U} to display "Maintenance", and then press {
Enter
}.
<Menu> j
Maintenance l
The following message appears on the panel display.
<Maintenance> j
1.Reinstall l
D
Press {T} or {U} to display "8.Log Protect", and then press {
Enter
}.
<Maintenance> j
8.Log Protect l
The following message appears on the panel display.
<Log Protect> j
On l
E
Press {T} or {U} to select “On” or “Off”, and then press {
Enter
}.
<Log Protect> j
Off l
This registers the setting and returns to the “Maintenance” menu.
F
Press {
On Line
}.
The "Ready" message appears on the panel display.
Deleting the User Code Record
This procedure describes how to clear the User Code record.
Note
❒ If “Log Protect" is set to "On", you can not delete the User Code record. Select
"Off" in “Log Protect", and then follow the procedure below.
A
Check if the On Line indicator stays on. If not, press {
On Line
}.