Ricoh AP306 - Manual (Page 112)

Using the Operation Panel
100
5
Interpreting the Configuration Page
Interpreting the Configuration Page/IPDL-C
Reference
❖ Firmware Version
This shows the printer firmware version.
❖ Total Installed RAM
This shows the total amount of memory installed in the printer.
❖ Option Interface
This indicates whether there is an optional parallel interface board or Net-
work Interface Board installed in the printer.
Printer Information
❖ Tray1, Bypass Tray
This shows the paper sizes specified with the paper size dial and the opera-
tion panel for the standard paper tray and the bypass tray.
If you install the paper feed unit, it is described as “Tray2” and/or “Tray3”.
Note
❒ If "FRE" is indicated for bypass tray, it means "Custom Size" is set for by-
pass tray. "R" after paper size (A3, for example) means that paper is set in
the short-edge K feed direction.
Paper size Indication on the con-
figuration page
A3K A3R
B4 JISK B4R
A4L A4
B5 JISL B5
A5L A5
B6 JISK B6R
A6K A6R
11"
×
17"K DLR
8 1 /
2
"
×
14"K LGR
8 1 /
2
"
×
11"L LT