troubleshooting, Error & status messages, Printed error message – Ricoh AP306 User Manual
Page 49: Troubleshooting
37
4. Troubleshooting
Error & Status Messages
There are three types of error and status messages.
• Printed error message
• Error and status messages on the operation panel
• Getting printer information over the network
Printed Error Message
The error message shown below is output by the printer whenever there is not
enough memory to print data.
Error message
Required action
There is not enough memory in your
printer to print this page.Change print
quality in the printer driver and try
again.For details, please refer to the trou-
bleshooting section in your manual.
The following are the actions you should
take when you encounter memory short-
age problems. If these actions do not solve
the problem individually, try them in
combination with each other.
A
Increase printer memory.
Install the optional memory unit to in-
crease the amount of printer memory.
B
Change the color level settings.
• IPDL-C printer driver
Set
[Printing Mode]
to
[Fast]
.
Set
[Resolution:]
to
[600 dpi / Fast]
.
• RICOH-SCRIPT2 printer driver
Set
[Gradation]
to
[Fast]
.